Double Glazed Window Repair
It is worth looking into the warranty that comes with the majority of double-glazed windows. It generally covers any problems with the window hardware such as hinges and locking mechanisms - in the first 10 years.
A leak in the seal can be the reason for mist to form between your glass windows. This needs to be repaired immediately to avoid mold or damp growing in your home.
Condensation Between the Windows
If you notice condensation forming between your windows, it is an indication that the sealing in the insulating gases has failed. This is a serious issue that must be dealt with promptly, especially in winter, when humidity levels are at their highest. It could also lead to damage to the sills, sealant, and may cause mildew or mould.
Double-glazed windows should not have condensation between the panes. This could be caused by excessive humidity or a particularly cold snap. This issue is usually resolved without having to replace the entire window. A professional can drill small holes in the glass and then spray the inside of the window with a special cleaning solution. The moisture is then removed from the window and an anti-fogger can be installed to stop the build-up of moisture in the future.
Condensation between the windows can also occur due to air leakage, or other factors outside of the window. In this scenario it can take a longer time for moisture in the window to build up, because the air must be sufficiently warm to vaporise the water molecules. In these instances, it may be better to replace the double glazed windows instead of trying to repair the seals on the existing units.
A double-glazed windows is made consisting of three or two pieces of insulated glass, held together by a frame made of metal. The gap between the two windows is filled with an insulating gas, such as Krypton or argon and then sealed. The seal prevents the insulating gas from escaping and also preventing moisture and air from entering into the gap.
As the windows get older, the seals get worse and allow moisture to leak into the gaps between the glass panes. When the seals leak it is crucial to be aware of this since it means that the double glazing is no longer performing the way it did in the past. This could lead to lower energy efficiency, higher heating bills, damage to property and the possibility of condensation forming between windows.
Mist
If you notice condensation on the outside of your windows, it is totally normal - it means that your double-glazed is in good working order and retaining the heat in your home. The condensation occurs because the outside air is hotter than the glass, and it reaches the dew point of the window prior to the air inside. This is one of the major advantages of having high-quality double glazing.
If the condensation is located on the inside of your window then it could be a sign of a ventilation issue in your home. The excess moisture won't go anywhere else and ends up on the carpet, window furniture, and other areas of your home. It is recommended to have this checked by an expert and ensuring that there plenty of fresh air flowing through your home will help prevent it from happening in the future.
Another reason for mist on double-glazed windows is that the seal between two glass panes is broken. This could be due wear and wear or chemical cleaning solutions that are being used. The best thing to do is fix the windows in the shortest time possible.
The professional repair of your windows will ensure that they remain waterproof and free of condensation, fogging and misting. It's also cheaper than replacing them completely and will reduce your energy bills.
A FENSA registered window installer can provide you with a cost estimate for repair or replacement of your double-glazed windows. If your windows are old and have been used for a long time you might want to consider changing them to new A-rated energy efficient windows.
upvc window repairs is recommended to keep copies of any agreements and warranties with the window installers. This will be very useful if any problems with the windows arise in the future, and you can then contact your window fitters to resolve these issues. This is a better option than ignoring the issue, which could lead to more problems for your home.
Close or open without difficulty
It's not just annoying when double-glazed windows can be difficult to open or close. They can also result in higher energy bills because of the loss of heat and drafts. It could also be a security problem especially if the locks aren't working properly. It is essential to fix any issues with double-glazed doors and windows when you discover them.
If you can't open your windows and have tried the simplest solution like using a screwdriver in order to break it open, or tapping the frame with a hard object, the issue may be more serious. It could be that the window has shifted in its frame and needs to be re-set or there is gaps between the glass panes and the frames. In either case, seek out a double glazing repair expert to ensure that the repairs are done properly and to prevent further problems.
It is not unusual for UPVC window handle and lock mechanisms to become difficult to operate or become stuck particularly when they're old and worn. This is due to a build up of grease or dirt inside the handle and can often be resolved by cleaning it using a uPVC cleaner. If this doesn't work then you can try tapping the uPVC frame with a hard object like a screwdriver, taking care not to harm the handle or the mechanism for window handles.
If this doesn't solve the problem then the window might need to be replaced as it is likely that the hinges aren't more in the proper position, or the locking mechanisms are damaged. In this case, you should contact a UPVC window specialist.
David The Window Wizard is a specialist in double-glazed door and window repairs, including fixing windows that are double-glazed and have jammed or been locked shut. He has lots of experience converting old window mechanisms into modern. This can save you money in the replacement of the entire window. For more information or to book a free quote call or email us today.
Warping
Double-glazed windows are typically an excellent option to save energy at home. They are made up of two separate panes which have a spacer or dense gas between them. This creates a seal that keeps cold air out and warm inside. However, over time, these windows may become damaged or break and require repair. Luckily, most of these repairs are easy and can be done without the cost of replacing the entire window.
Warping is a frequent issue with double-glazed windows. This occurs when the windows start to bow, bend or twist, which can alter the structural integrity of the window as well as its ability to insulate. The best way to prevent this problem is to make sure that your double glazed windows are properly installed and maintained regularly.
If your double glazed windows are beginning to swell, it's essential to speak with a professional immediately to help prevent the problem from getting worse. They can inspect your windows and identify the reason for the warping. They will make use of special tools to correct your issue and ensure that your windows are sealed properly.
The most common cause of this issue is the presence of water vapour in the windows which can accumulate over time. It can be caused by a variety of elements, such as weather conditions such as humidity levels, temperature and variations. To fix this the expert will drill a small hole in the window to let out the moisture. The specialist will use an agent for cleaning on the glass to cleanse it, then apply a sealant.
If windows aren't able shut or opened, it could be an indication of a break in the mechanism or hinges. Before calling an expert to resolve the problem, it is worth lubricating these parts. This can usually fix the issue and decrease the need for replacements. However, if your windows are old or do not provide the insulation you'd like to see, it is often better to replace them.